PRO-COAT SPECIFICATIONS

Color - Clear/Slight Amber
Solids - 45-50%
Odor - Mineral Spirits
Flash Point - >103°F
Density - 7.42 lbs / gallon
Viscosity - (#2 Zahn @25°C) 30 Seconds

Leveling - Excellent
Defoaming - Excellent Drying Time - 8-12 hours
Cure Rate - 40% 24 Hour -100% Two Weeks

SURFACE PREPARATION

Surface must be thoroughly cleaned and prepared by appropriate sanding methods.
Prior to the coating application, remove all dust from floor and surrounding structures.
NEW FLOORS are ready for coating after the above procedures are complete.
RECOATING existing surfaces must be evaluated and compatibility determined by the applicator.
ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY

APPLICATION

CAUTION! MIX WELL before applying.
May be applied by tight nap lambs wool, foam applicator, roller or spray.
If applied by roller, roll at moderate speed to prevent foaming.
Apply three (3) uniform coats. For best performance avoid thick coats.
BEFORE RECOATING, allow to dry at least eight (8) hours, sand lightly and dust.

GENERAL

Covers 450-500 square feet per gallon for first coat on new, smooth wood;
500-550 square feet for succeeding coats.
Dries to touch in 2 to 4 hours.
Do not apply on damp days or when surface temperature is below 40 degrees F.
Clean paint tools with solvent

MAINTENANCE

DIRECTIONS: SWEEP OR VACUUM TO REMOVE ANY LOOSE DIRT. SPRAY ON PRO-CARE HARDWOOD
FLOOR CLEANER, wipe off with dry rag. On stubborn spots, rubber heel marks or sticky spills, etc.
Spray PRO-CARE on the area — let set a few moments — wipe off with dry rag.
NOTE some hard wiping may be required on tougher stains.
SPOT CLEANING: Spray PRO-CARE on spot — wipe off with dry rag.
Put walk-off mats at all entrance doorways to keep out excessive dirt and grit.

OTHER PRO-COAT PREMIUM PRODUCTS

We also have many other innovative products to help protect your precious wood investments.

Pro-Coat Premium Bond-007 - Adhesion Promoter
Pro-Coat Dry Hard - Drying agent Pro-Coat
Pro-Coat Premium Polyurethane - Wood Finish
Pro-Care Floor Cleaner - Hardwoods, Tile and Marble
Pro-Coat Premium Millennium - Waterbourne Urethane
Pro-Coat Purethane Wood Finish - Advanced Waterbourne Technology
 

We at Professional Coatings, Inc. believe the information, data and suggestions given here to be reliable,
but since conditions of use and application are beyond our control, we cannot guarantee results.
Nothing herein is to be construed as license to use a material in infringement of patents.

“Formulated To A Higher Standard”
PROFESSIONAL COATINGS, INC. • 100 Commerce Park Dr. • Cabot, AR 72023
(501) 843-7509 • (800) 962-0344 • Fax (501) 843-9261 • www.ProCoatInc.com